Tag Archive for: coriolis mass flowmeter

You are here: / coriolis mass flowmeter

Posts

Flow Measurement Systems and Sensors

,

Flow measurement is one of the most fundamental parameters in industrial processes. Accurate flow measurement is essential for production efficiency, energy optimization, process safety, and product quality.

Flow Measurement Techniques

PRINCIPLES OF FLOW MEASUREMENT

Flow rate is defined as the quantity of fluid passing through a cross-sectional area. The basic formula is:

Q = A · v

Where Q is volumetric flow rate (m³/s), A is cross-sectional area (m²), and v is flow velocity (m/s).

Mass flow rate can be expressed as:

ṁ = ρ · Q

Where ṁ is mass flow rate (kg/s), ρ is fluid density (kg/m³).

TYPES OF FLOW MEASUREMENT DEVICES

  • Orifice Plates: Simple and cost-effective, but with higher pressure losses.
  • Venturi Tubes: Provide higher accuracy with lower pressure drop.
  • Pitot Tubes: Suitable for gases and low-viscosity fluids.
  • Electromagnetic Flowmeters: Highly accurate for conductive liquids.
  • Ultrasonic Flowmeters: Offer non-contact measurement.
  • Mass Flowmeters (Coriolis): Directly measure mass flow with high precision.

FACTORS AFFECTING MEASUREMENT ACCURACY

  • Changes in fluid temperature and viscosity
  • Pipe diameter and roughness
  • Installation position of the flowmeter
  • Calibration and maintenance issues

STANDARDS AND CALIBRATION

  • ISO 5167: For orifice, venturi, and nozzle-based flow measurement devices
  • ISO 4185: Standard for flowmeter calibration
  • ISO 17025: Accreditation for calibration laboratories

APPLICATION AREAS

  • Flow monitoring in water and wastewater treatment plants
  • Steam and fuel flow measurement in power plants
  • Reactor and pipeline flow control in chemical industries
  • Liquid flow control in food and beverage industries

CONCLUSION

Flow measurement systems are critical for ensuring reliable and efficient production in industrial plants. Proper device selection, correct installation, and regular calibration guarantee process continuity and safety.

Flow Measurement Techniques

Flow measurement is one of the most critical parameters in industrial processes. The amount, velocity, and characteristics of a fluid directly affect product quality and system efficiency in industries such as power generation, water treatment, petrochemicals, and food production.

Flow Measurement Techniques

FLOW CONCEPT AND BASIC FORMULA

Flow (Q) is the volume of fluid passing through a cross-section per unit of time.

Formula:
Q = A · v

Where Q (m³/s) is the flow rate, A (m²) is the pipe cross-sectional area, and v (m/s) is the average velocity.

The Bernoulli principle, which describes the conservation of energy in a fluid, forms the basis of many flow measurement techniques.

MECHANICAL MEASUREMENT METHODS

• Orifice Plate: Based on pressure drop; a cost-effective but less accurate method.
• Venturi Tube: Provides higher accuracy with minimal pressure loss.
• Pitot Tube: Commonly used for velocity measurement.
These methods are defined under ISO 5167 standards.

MODERN FLOW MEASUREMENT TECHNOLOGIES

• Ultrasonic Flowmeter: Measures the effect of the fluid on sound waves; has no moving parts.
• Magnetic Flowmeter: Works on electromagnetic induction principle; suitable for conductive fluids.
• Mass Flowmeter (Coriolis): Directly measures mass flow with high accuracy, widely used in critical applications.

FACTORS AFFECTING MEASUREMENT ACCURACY

• Fluid viscosity
• Changes in temperature and density
• Turbulence within the pipeline
• Installation conditions and sensor placement

Ignoring these factors may result in significant measurement errors.

CALIBRATION AND STANDARDS

Regular calibration of flow measurement devices is necessary. ISO 5167 defines calibration methods for differential pressure devices such as orifice and Venturi tubes. Additionally, AGA reports (e.g., AGA3) are widely applied in natural gas flow measurement.

INDUSTRIAL APPLICATIONS

• Monitoring liquid and gas flows in petrochemical industries
• Steam and water flow control in power plants
• Inlet/outlet flow monitoring in water treatment plants
• Accurate liquid measurement in food industry processes

CONCLUSION

Accurate flow measurement is essential for process safety and efficiency. Proper device selection, compliance with standards, calibration, and correct installation conditions ensure reliable and sustainable operation of industrial facilities.

© Copyright - Convalve