Tag Archive for: safety valves

You are here: / safety valves

Posts

Automation and Safety Systems in Natural Gas Pressure Reduction Stations

,

Natural gas is transported through transmission pipelines at high pressures, typically between 40–70 bar, before it reaches city networks and industrial facilities. To ensure safe and efficient delivery, the pressure must be reduced and controlled. This is the responsibility of Pressure Reduction Stations (PRS), which play a vital role in natural gas infrastructure.

In recent decades, PRS operations have increasingly relied on automation technologies and advanced safety systems, ensuring reliability, efficiency, and protection for both people and the environment.

Valves Used in Pressure Reducing

THE ROLE OF AUTOMATION SYSTEMS

SCADA Integration

  • SCADA (Supervisory Control and Data Acquisition) platforms monitor key parameters such as pressure, flow, and temperature in real time.
  • Operators can remotely open and close valves, adjust regulator settings, and respond instantly to emergencies.

Sensors and Measurement Technologies

  • Pressure sensors: Detect sudden downstream fluctuations.
  • Flow meters: Measure consumption and assist in leak detection.
  • Temperature sensors: Track thermodynamic properties of gas.

Automated Valve Control

  • Critical PRS facilities employ pneumatically actuated ball valves for rapid response.
  • In emergencies, these valves close automatically, triggered by SCADA commands or sensor signals, ensuring fast isolation of the pipeline.

SAFETY SYSTEMS

Pressure Safety Valves (PSVs)

  • Protect against unexpected overpressure conditions.
  • Designed in accordance with API 520/521 standards.

Dual Regulation + By-Pass Design

  • If one regulator fails, the secondary regulator maintains supply.
  • By-pass valves ensure continuous flow during maintenance operations.

Gas Leak Detectors

  • Detect even minor leaks within the station.
  • Integrated into SCADA systems for early warnings and rapid intervention.

Fire and Explosion Sensors

  • Flame and heat detectors enhance safety monitoring.
  • In high-risk events, automatic fire suppression systems are activated.

ENGINEERING CALCULATIONS

Pressure Drop Calculation

ΔP = Pin − Pout

  • Pin: Inlet pressure (bar)
  • Pout: Outlet pressure (bar)

Example: If inlet pressure is 70 bar and outlet pressure is reduced to 19 bar:
ΔP = 70 − 19 = 51 bar

PSV Set Pressure

Safety valve set pressures are typically 110–120% of outlet pressure.

  • For 19 bar outlet pressure, PSV set pressure ≈ 21–22 bar.

SCADA Trend Analysis

  • Collected sensor data is displayed as trend graphs.
  • These graphs help verify regulator stability and detect anomalies in real time.

REAL-WORLD APPLICATIONS

  • Turkey (BOTAŞ City Gate Stations): Equipped with dual regulators, safety valves, and SCADA-based automation as a standard.
  • Germany (Ruhr Region): Uses redundant regulator systems with by-pass valves for 100% backup reliability.
  • Japan: Seismic sensors are integrated into PRS to automatically shut down gas flow during earthquakes.

CONCLUSION

Automation and safety systems in natural gas pressure reduction stations are no longer optional—they are a necessity. With SCADA integration, advanced sensors, safety valves, and intelligent control systems, PRS facilities achieve:

  • Higher operational efficiency
  • Rapid response to emergencies
  • Enhanced protection of people and the environment

Looking ahead, predictive maintenance powered by artificial intelligence and smarter sensor technologies will further improve the safety and reliability of natural gas infrastructure worldwide.

Valves in Natural Gas Pressure Reduction Stations: Types, Features, and Selection Criteria

,

In high-pressure transmission pipelines, natural gas typically flows at 40–70 bar. However, city networks and industrial facilities require the gas at much lower pressures, usually between 1–20 bar. This adjustment is achieved in pressure reduction stations (PRS). Within these stations, valves play a critical role, not only in reducing pressure but also in ensuring operational safety, efficiency, and continuity.

Valves Used in Pressure Reducing

KEY TYPES OF VALVES IN PRESSURE REDUCTION STATIONS

Pressure Reducing Valves (PRVs)

  • The primary element of PRS, designed to reduce high inlet pressure to a stable and safe outlet pressure.
  • Features:
    • Precise control of downstream pressure
    • Noise and cavitation reduction options
    • Compatible with automation and control systems
  • Standards: EN 334, ISO 23555

By-Pass Valves

  • Provide redundancy in case of regulator failure or during maintenance.
  • Example: Critical installations often employ dual regulators plus a by-pass line to guarantee uninterrupted supply.

Blowdown / Drain Valves

  • Used to depressurize or empty sections of the pipeline.
  • Function: Ensures maintenance safety by isolating sections under pressure.

Safety and Relief Valves

  • Protect the system against unexpected overpressure conditions.
  • Working principle: Opens automatically at a preset pressure to release excess gas.

Control Valves

  • Integrated into SCADA and PLC systems for continuous monitoring.
  • Adjust flow, pressure, and temperature parameters dynamically.
  • Essential in industrial city gate stations with high consumption levels.

VALVE SELECTION CONSIDERATIONS

Flow Range and Capacity

Valves must cover both minimum and maximum consumption scenarios.

  • Example: For a PRS with a design flow of 5,000 Sm³/h, the pressure reducing valve should reliably handle flows between 2,000–7,000 Sm³/h.

Pressure Drop (ΔP)

Pressure reduction is the core task of PRS valves.
ΔP = Pin − Pout

  • Pin: Inlet pressure (bar)
  • Pout: Outlet pressure (bar)

Engineering Note: Rapid fluctuations in outlet pressure can trigger cavitation and noise problems.

Control Characteristics

  • Linear: Flow increases proportionally with valve opening.
  • Equal Percentage: Provides stable control at low openings and rapid flow increase at higher openings.
  • Quick Opening: Best suited for emergency shutoff or rapid actuation.

Cavitation and Noise Control

  • High-pressure drops can cause cavitation inside the valve body.
  • Solution: Multi-stage pressure-reducing valves or silencers.

Actuator Type

  • Pneumatic Actuators: Fast response, most common in PRS.
  • Electric Actuators: Strong integration with SCADA but slower response.
  • Hydraulic Actuators: Used in extra-large valve sizes.

SAFETY AND STANDARDS

  • EN 334 – Gas pressure regulators
  • ISO 23555 – Industrial gas pressure regulation
  • PED (Pressure Equipment Directive) – EU pressure equipment directive
  • ASME – Pressure ratings and design standards

REAL-WORLD APPLICATIONS

  • Istanbul City Gate Stations (Turkey): High-capacity PRVs reduce gas pressure from 70 bar to 19 bar for city distribution.
  • Ruhr Region (Germany): Dual regulators with by-pass valves provide 100% redundancy for enhanced reliability.
  • Japan: Multi-stage noise-reducing valves are installed in urban PRS located near residential areas.

CONCLUSION

Valves in pressure reduction stations are fundamental to safe, efficient, and uninterrupted natural gas distribution. Selection must consider flow ranges, pressure drops, cavitation risk, and automation requirements. Modern PRS increasingly rely on SCADA integration, advanced regulators, and multi-stage valve designs to ensure both operational efficiency and safety. Choosing the right valve technology is not just a matter of performance—it is a cornerstone of reliable and sustainable gas supply.

© Copyright - Convalve